How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1572
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I replaced the clutch disk, pressure plate and release

Customer Question

I replaced the clutch disk, pressure plate and release bearing on my 2005 Ford Escape 2.3L manual. Tried bleeding the clutch slave cylinder but it won't go into gear.
Submitted: 7 months ago.
Category: Transmissions
Expert:  Roy replied 7 months ago.

good morning my name is ***** ***** I will assist

there is only one way the clutch disc can go when assembling. did you install it correctly. there should have been a tag that said flywheel side.

does the pedal feel normal or does it have too little or a lot of resistance???


Related Transmissions Questions