How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Transmissions
Satisfied Customers: 21574
Experience:  Chrysler/Dodge/Jeep master tech ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans Specialist
9825021
Type Your Transmissions Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I've just installed re-built 46re trans into my 1996 dodge

Customer Question

I've just installed re-built 46re trans into my 1996 dodge ram pickup and also replaced the t v cable. Now I'm noticing a hard shift out of second and third gear. What can I do to make it shift right?
Submitted: 11 months ago.
Category: Transmissions
Expert:  sprinkles08 replied 11 months ago.

Hello and welcome to JustAnswer!

The issue may be internal in the replacement trans or it could be throttle valve cable adjustment. You mentioned a hard shift out of second and third, which would mean the 2-3 and 3-4 upshifts. The 3-4 upshift wouldn't be affected by the throttle valve cable.

Where did the replacement trans come from?
Can you explain how the cable was adjusted?

Related Transmissions Questions