How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Transmissions
Satisfied Customers: 22536
Experience:  Chrysler/Dodge/Jeep master tech ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans Specialist
9825021
Type Your Transmissions Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Just go in first gear no change, p2225,p2228,p2822

Customer Question

just go in first gear no change, p2225,p2228,p2822
Submitted: 1 year ago.
Category: Transmissions
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to Justanswer!

P2822 doesn't show to be valid and it looks like the other two codes came from the engine controller but they point to a transmission speed senor issue. Input speed sensor failures on this trans aren't uncommon.

Did you also read codes from the transmission control module?

Customer: replied 1 year ago.
only 3 codes is not shifter, just first gear
Expert:  sprinkles08 replied 1 year ago.

These codes weren't found in the TCM. Did you attempt to read codes from the TCM or are you not using equipment with the capability?

Related Transmissions Questions