How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Transmissions
Satisfied Customers: 22134
Experience:  Chrysler/Dodge/Jeep master tech ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans Specialist
9825021
Type Your Transmissions Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Saab 900 S: Type Your Question Here...

Customer Question

Type Your Question Here...
Submitted: 1 year ago.
Category: Transmissions
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!
If you're setting a solenoid circuit code and the solenoid has been replaced then odds are there is a wiring issue. Solenoid circuit codes will set when circuit voltage/resistance isn't correct, a failed solenoid is most common but it can definitely be a wiring or even trans controller issue.
No problem description was posted with the question. What kind of problem are you having?