How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1617
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
2499435
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I JUST PUT IN A USED TRANSFER CASE, 57k MILES, IT WAS

Customer Question

I JUST PUT IN A USED TRANSFER CASE, 57k MILES, IT WAS SUPOSEDLY TESTED. I STILL HAVE THE SAME PROBLEM AS I DID WITH THE OLD ONE. IT WILL NOT SHIFT INTO EITHER LOW OR HIGH 4WD. THE LIGHT JUST BLINKS IN EITHER POSITION. IS THERE A WAY TO TEST IT ALL?
Submitted: 1 year ago.
Category: Transmissions
Customer: replied 1 year ago.
MY OLD TC STOPPED WORKING AFTER TRYING TO PULL SOMETHING I SHOULD NOT HAVE TRIED TO PULL. HOW CAN I TEST THE ACTUATOR, OR WHATEVER BEFORE PULLING THE TC OUT AGAIN?
Expert:  Gary replied 1 year ago.
what year is this truck ?when selecting 4HI do you hear the encoder motor on the transfer case engage at all ?