I just went to auto zone to trouble shoot a problem. within the diagnostics. The receipt that I have says it is an incorrect gear ratio...The TCM has detected that the transmission is trying to mechanically shift to a lower gear than attended. Probable cause:TCM fault Mechanical transmission fault. COuld you please explain what this might entail?
Optional Information: Year: 2007 Make: Chrysler Model: 300 Engine: 5.7 Already Tried: havent tried anything
Hello, I am Randallquestions:do you have the code or codes set by #how is it shifting?
the code was P0730. It did sift fine. I was going about 35 and tried to get around a truck, hit the gas and the car seemd to go in neutral then it seemed like it went into gear but the light is still on
The car seemed to shift normal once it came out of neutral. I have driven it since this happened however the light is still on.
bear with things for a bit. JA site is running a little slow but sure will get fixedAfter this, has it continued to now shift ok, no problems so basically all ok now?last fluid change? miles or date?I see you did a double response so please be patient for short bit, JA site is glitching right now. sorry for thatso,, last fluid change? and all is ok now correct?
Very sorry for the delay. JA had site issues and I was locked out for good while. Appears all working again now Now,, what I had asked: has the fluid ever been changed and if so when?You have been driving it some now, has the problem returned? i understand light still on but any more shift problems>?