How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 901
Experience:  16 years of experience
2499435
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

The car does nothing no turn over no lights jumping does not

Customer Question

the car does nothing no turn over no lights jumping does not work and the battery seems good with a 12.97 charge. its a 2007 rav 4
JA: Just to clarify, what are the exact lights you're talking about?
Customer: all of them. but i tried to turn the head lights on
JA: What is the model of your '12 Toyota?
Customer: 2007 rav4 sport
JA: Are you fixing your RAV4 yourself? What have you tried so far?
Customer: checking the battery. and jump start. i was driving it around town. came home to grab something i forgot went back out to the car and nothing now when i turned it off it did let me take the key out while it was in drive which it normally does not do. i out it in park after the key was out
JA: Anything else you want the mechanic to know before I connect you?
Customer: i think that is everything
Submitted: 4 months ago.
Category: Toyota
Expert:  Ted Ritter replied 4 months ago.

Thanks for posting

So when you turn the key to on the dashlights don't turn on and the headlights don't work either, seems completely dead?

Customer: replied 4 months ago.
The entire car is completely dead. The lights, radio, everything is dead. But the battery was OK, it had 12.9 volts.
Expert:  Ted Ritter replied 4 months ago.

Thanks for the reply, have you checked the battery now before you replied?

Expert:  Ted Ritter replied 4 months ago.

Make sure the cable terminals are tight.