How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ted Ritter Your Own Question
Ted Ritter
Ted Ritter, Toyota Master Tech
Category: Toyota
Satisfied Customers: 4228
Experience:  Toyota Master Tech, ASE Certified
1279120
Type Your Toyota Question Here...
Ted Ritter is online now
A new question is answered every 9 seconds

I HAVE A FAULT CODE B2313, Its a window motor fault code,

Customer Question

I HAVE A FAULT CODE B2313
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: Its a window motor fault code,
JA: What is the make/model/year of your car?
Customer: yes i tried to reset
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: IT WAS SCANED / THE VEHICLE IS TOYOTA
JA: What year is your Toyota?
Customer: 2015
JA: Anything else you want the mechanic to know before I connect you?
Customer: NO
Submitted: 19 days ago.
Category: Toyota
Expert:  nelson freitas replied 19 days ago.

Hello,

Thanks for using JustAnswer, my name is ***** ***** I have been an automotive technician for over 12 years now. And I am currently working at a Toyota Dealership.

I'ld like to help you with your problem, but I will require some more information. Which vehicle is this for and also are there any problem associated with this code?

Nelson

Customer: replied 18 days ago.
This some sort of window fiction fault
Expert:  nelson freitas replied 18 days ago.

Unfortunatly I do not have any access to the noah repair informaiton since it is not sold in Canada or the US

Expert:  Ted Ritter replied 17 days ago.

Hello, the window jam protection system may need to be reset,

with the driver's side window in the down position disconnect the battery negative cable for one minute, reconnect it and use the MANUAL part of the master switch to roll the window up, when all the way up hold the switch for two seconds, using the same switch roll it down and again hold for two seconds. Use the auto up function and it should now work normally.

Customer: replied 17 days ago.
Thank you I will try that
Expert:  Ted Ritter replied 17 days ago.

Good luck, let me know.

Related Toyota Questions