How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 842
Experience:  16 years of experience
2499435
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

I have a verso 2007 and sometimes facing problem on gear

Customer Question

hi i have a verso 2007 and sometimes facing problem on gear shifting so if i stop on the traffice light suddenlly the gear goes to N and its flashing and im no more able to shift to*****the car
JA: Just to clarify, can you tell me which light it is? And does it blink first, then stay on steady?
Customer: i have to turn off the car and wait for 60 second and then redrive
JA: What is the model of your '07 Toyota?
Customer: Drivetrain malfunction Verso 2007 corolla verso 2007
JA: Are you fixing your Corolla yourself? What have you tried so far?
Customer: i did not try anything yet
JA: Anything else you want the mechanic to know before I connect you?
Customer: no thanks
Submitted: 1 month ago.
Category: Toyota
Customer: replied 1 month ago.
you can see the indicator i got once i face the problem! its on the attached image, number 24
Customer: replied 1 month ago.
Once i stop after driving a while the gear lever will go to Neutral and showing a flashing N on display. then if i tried to shift to 1 or R
2 The display instead of showing 1 or R just flashes N in the drive positions.3 Reselection tried a number of times from 1 to N to R but still flashes N in the drive positions or a non flashing N in Neutral as normal. It will not engage gear and move unless i turn off the engine and wait for at least 60 second and then turn it on, sometimes i need to turn it off and on multiple times then the light will be disappear and the gear can engae !!!
Expert:  Chad Farhat replied 1 month ago.

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Customer: replied 1 month ago.
i hope you understand my issue, i have searched on the internet and found many people facing same problem !
Expert:  Chad Farhat replied 1 month ago.

i don't yet I will let you know if I can help or not ,I m looking at some circuits on it

be right back with you

Chad

Expert:  Chad Farhat replied 1 month ago.

Hey how are you '

the issue will be in tcm module that needs ref lasing or internally please read below

TRANSMISSION & CLUTCH TC015-07 Title: HARSH SHIFT AND M.I.L. "ON" DTC P2716 Models: '05 - '07 Corolla & Matrix (1ZZ-FE) September 20, 2007 TSB UPDATE NOTICE: The information contained in this TSB supercedes TSB No. TC014-06. TSB No. TCO14-06 is now obsolete and should be discarded. Introduction Some 2005 - 2007 model year Corolla and Matrix vehicles equipped with an automatic transaxle may exhibit a harsh shift condition and a M.l.L. ON" with DTC P2716 stored. Improvements have been made to the Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) to reduce the possibility of this condition occurring. Use the following procedure to repair the vehicle. Applicable Vehicles ^ 2005 - 2007 model year Corolla and Matrix (2WD) vehicles equipped with the 1ZZ-FE engine.

Zoom and Print Options

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Federal Emissions Warranty. This warranty is in effect for 96 months or 80,000 miles, whichever occurs first, from the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Zoom and Print Options

Parts Information

Zoom and Print Options

Required Tools & Equipment

Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE).

Inspection Procedure

If the vehicle is currently exhibiting a harsh shift condition and M.I.L. "ON" with DTC P2716 stored, refer to the Technical Information System (TIS) and follow the diagnostic procedures below.

^ 2005 model year Corolla Repair Manual, Drivetrain - Automatic Transmission/Transaxle - "Electronic Controlled Automatic Transaxle [ECT]: P2716 Pressure Control Solenoid 'D' Electrical"

^ 2006 or 2007 model year Corolla Repair Manual, Drivetrain - Automatic Transmission/Transaxle - "A245E Automatic Transaxle: Automatic Transaxle System: P2716: Pressure Control Solenoid 'D' Electrical (Shift Solenoid Valve SLT)"

^ 2005 model year Matrix Repair Manual, Drivetrain - Automatic Transmission/Transaxle - 'A246E: Electronic Controlled Automatic Transaxle [ECT]: P2716 Pressure Control Solenoid 'D' Electrical"

^ 2006 or 2007 model year Matrix Repair Manual, Drive train - Automatic Transmission/Transaxle - 'A246E Automatic Transaxle: Automatic Transaxle System: P2716: Pressure Control Solenoid 'D' Electrical (Shift Solenoid Valve SLT)"

Repair Procedure

1. Replace the ECM (PCM).

Refer to TIS:

^ 2005 model year Corolla or Matrix Repair Manual, Engine/Hybrid System - Engine Control - "1ZZ-FE 2ZZ-GE: ECM: Replacement"

^ 2006 or 2007 model year Corolla or Matrix Repair Manual:

^ Engine/Hybrid System - Engine Control - "1ZZ-FE Engine Control System: ECM: Removal"

^ Engine/Hybrid System - Engine Control - "1ZZ-FE Engine Control System: ECM: Installation"

2. Register the VIN into the replacement ECM (PCM). Refer to TIS:

^ 2005 model year Corolla or Matrix Repair Manual, Engine/Hybrid System - Engine Control - "1ZZ-FE: SFI System: Registration"

^ 2006 or 2007 model year Corolla or Matrix Repair Manual, Engine/Hybrid System - Engine Control - "1ZZ-FE Engine Control System: SFI System: Registration"

T-TCI-4000 May 7, 2013 TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE Service Category Engine/Hybrid System Section Engine Control Market Canada

3. Test drive the vehicle to confirm the repair.

Please let me know

Thank You

Chad Farhat

ASE Certified Technician