How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roy Your Own Question
roy
roy, import/domestic specialest
Category: Toyota
Satisfied Customers: 4656
Experience:  ASE master tech for 40 years
3506196
Type Your Toyota Question Here...
roy is online now
A new question is answered every 9 seconds

Reading on how to get the evap and catalyst monitors to run,

Customer Question

reading on how to get the evap and catalyst monitors to run
JA: How many miles are on the car? Have any warning codes popped up?
Customer: just hit 200000. I had the bank 1 catalyst efficiency before just recently switching out the bank 1 cat convtr and 02 sensor
JA: What is the model of your '02 Toyota?
Customer: camry le
JA: Are you fixing your Camry yourself? What have you tried so far?
Customer: With the assistance of my friend who works at Honda
JA: Anything else you want the mechanic to know before I connect you?
Customer: He already tried to run the monitors on his scan tool, but they still show not ready
Submitted: 1 month ago.
Category: Toyota
Expert:  roy replied 1 month ago.

good afternoon my name is ***** ***** I will assist

you cannot run monitors from a scan tool. the car must be driven.

after and overnight sit, start the car and let it warm up. then take it on a freeway for a ride. get up to 55 mph and stay there for 10 minutes, do not touch the brakes or the test will stop.

vary the speed from 50 to 60 and back. do this procedure 3 times and re check the monitors.

Roy

Expert:  roy replied 1 month ago.

are you there

Related Toyota Questions