How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ted Ritter Your Own Question
Ted Ritter
Ted Ritter, Toyota Master Tech
Category: Toyota
Satisfied Customers: 4154
Experience:  Toyota Master Tech, ASE Certified
Type Your Toyota Question Here...
Ted Ritter is online now
A new question is answered every 9 seconds

I need a fuel pump wiring diagram/schematic.....I replaced

Customer Question

I need a fuel pump wiring diagram/schematic.....I replaced the fuel pump because it was only producing 10 psi fuel pressure, it should be 38-40 psi. But now I have no power at the connectoe connector
JA: Is the power loss consistent, or does it fluctuate?
Customer: it dosent show at all now
JA: What is the model of your '10 Toyota?
Customer: 2003 4Runner
JA: Are you fixing your 4Runner yourself? What have you tried so far?
Customer: yes
JA: Anything else you want the mechanic to know before I connect you?
Customer: I replaced the pump, check for 12 volts at the Fuse....good....
Submitted: 15 days ago.
Category: Toyota
Expert:  Ted Ritter replied 15 days ago.

Hello, thanks for posting

I'll have to take a look at the wire diagram and possibly give you a link for an illustration, this is going to take a little time, I'll get back to you very soon.

Expert:  Ted Ritter replied 15 days ago.

Expert:  Ted Ritter replied 15 days ago.

Please copy this link into your browser for a copy of the factory f/p diagram. You will see some wires designated colors as W/L this means white and light blue. Let me know if you have any questions.

Related Toyota Questions