How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, Technician
Category: Toyota
Satisfied Customers: 6794
Experience:  27 year experiences , 16 year shop owner
29331485
Type Your Toyota Question Here...
Greg is online now
A new question is answered every 9 seconds

Trouble with my 2007 Toyota Limited concerning knock

Customer Question

Trouble with my 2007 Toyota Limited concerning knock sensors
JA: Which particular sensor are you asking about? And have any trouble codes been triggered?
Customer: Yes, I have it at a pep boys and this has been a recurring issue. The 4wheel Lo is flashing, LSV, and
JA: What is the model of your '07 Toyota?
Customer: It's a Toyota Limited 4x4 5.7 Litre
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: No, I'm not fixing it myself. I've been told that the Intake Manifold has to come off and replace the 4 knock sensors @ $350 each and labor of $600, so a total of near $2,400
JA: Anything else you want the mechanic to know before I connect you?
Customer: No
Submitted: 1 month ago.
Category: Toyota
Expert:  Greg replied 1 month ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 1 month ago.

What is the malfunction code the repair shop had for the knock sensor's..

You got a very expensive quote was this the dealer's quote.

Greg.

Customer: replied 1 month ago.
I'm not sure what the code was, but I will get it and forward to you tomorrow morning. It is at a Pep Boys.
Expert:  Greg replied 1 month ago.

Good please do that .

Was ir Pep Boys with the quote.

Rgds Greg

Customer: replied 1 month ago.
The engine light is on, the traction control and VSC and 4x4 lights are blinking
Customer: replied 1 month ago.
My truck would not shift into 5th or 6th gear while driving with the lights blinking. After researching on the internet, I think it is P033D code. Comparing my issue with another one online sounds like a match, but I will send you the code tomorrow.
Expert:  Greg replied 1 month ago.

Okay good .

Please get me the actual code as many issue that are very simula to yours can be different causes .

When you have a knock sensor issue this can cause you no top gear .

and is normal for the VSC and $WD light to come on ,when you have a engine malfunction it will go into safe mode and deactivate the use of the VSC and 4WD. this is normal does not mean you have a problem with these system .

Even a O2 sensor malfunction will cause the VSC light to come on.

So lets wait for the actual code that has been stored in your ECM.

Rgds Greg

Customer: replied 1 month ago.
Greg,
Sorry for late response. Pep boys say it is the P0332, P0328, and the C1201 Brake booster. Should I just take it to dealer?
Expert:  Greg replied 1 month ago.

Okay thank you .

These codes will trip the other warning lights .

The knock sensors 1 and 2 have an open circuit or the sensor itself is bad and needs replacing .

This can be repaired by any toyota repair shop or dealer .

Rgds Greg

Related Toyota Questions