Toyota Repair Problems? Ask a Mechanic for Answers ASAP
Hello and welcome to just answer and allowing me to assist you. Well if it happened just after replacing the struts most likely the sub wire harness was damaged if they weren't disconnected to the wheel when doing the struts. To determine that you would have to disconnect each wheel sensor and sub wire to check for continuity to determine which one or you can drive for a while like that until the ECU has time to store a fault code you can pull to tell the one or ones that are effected.Hope this helps and if you require further assistance I'll be happy to do so.
is there anything I can further do for you on this subject? if not please leave a positve ratting for my help, thank you.