How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Toyota Mechanic
Category: Toyota
Satisfied Customers: 20667
Experience:  Heavy Line Mech-, Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.
1609972
Type Your Toyota Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Rear driver side window wont roll up, and it makes no

Customer Question

rear driver side window wont roll up, and it makes no sound,but the other windows work fine
JA: Is this your first time dealing with this issue?
Customer: yes I bought my 2005 Toyota corolla new at the end of 2004
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: it just stopped yesterday
JA: Anything else you think the mechanic should know?
Customer: that's all I can think of now , other than that it runs fine
Submitted: 6 months ago.
Category: Toyota
Expert:  Don 'Mo Lurch' replied 6 months ago.

.
sorry for the delay............
.
Greetings...... “Hi, I’m Don (akaCustomer and I look forward to helping you!”
.
This will likely be the Window Motor, but you need to remove the Door Panel & test the Voltage + & Ground - on the "2" wires at the Widow Motor, with the Key ON & Window Switch in Up or Down position, to confirm

Use of a VOM is needed to test
The way it works:
Ignition On
Switch held in Up position
One wire will have 12 Volts +
One wire will have Ground -

Switch held in Down position
The wire that had 12 Volts + is now Ground -
The wire that was Ground - is now 12 Volts +

If Voltage or Ground checks good at motor, replace motor.
If Voltage or Ground does not check good:
Check Switch Voltage & Ground.
Check for broken wires at Door / Kick Panel Boot

.
If you need procedure to remove the Door Panel, let me know

.
IF you need more information, please ask "prior" to Rating.
.
The way it works:
Once an answer is given, "you" as the customer, are expected to "RATE" the answer as you agreed to do.
.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.

Customer: replied 6 months ago.
thank you for the info, I,ve got good information some years ago YOU
Expert:  Don 'Mo Lurch' replied 6 months ago.

THANK YOU for the response.........
You can use a Test Light, but a Volt Meter (DC Volts) is best
Let me know if you need further

Expert:  Don 'Mo Lurch' replied 6 months ago.

.
Hi, I answered your question correctly & as soon as I saw it.
did you need more info?
please respond or rate my answer, as that is what was agreed to.
thank you
.

Related Toyota Questions