How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 773
Experience:  16 years of experience
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

Please show me how to set up a spring loaded button to hold

Customer Question

Please show me how to set up a spring loaded button to hold in that would keep the vehicle from turning over, starting, and cancel fuel pump if not held in, but would start and run normal after button is held in and released after start up.
Submitted: 2 months ago.
Category: Toyota
Expert:  Skyvisions replied 2 months ago.

Can you clarify what exactly you are trying to do here?

Customer: replied 2 months ago.

Make it so I can't start or run without holding in spring loaded button while starting. After start up runs like normal until I turn off ignition key and repeat.

Expert:  Skyvisions replied 2 months ago.

Ok that is not something I am going to be able to get into in this type of format.

Customer: replied 2 months ago.

OK I'll look elsewhere. Thank you and GOD BLESS YOU.

Related Toyota Questions