How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Auto Service Technician
Category: Toyota
Satisfied Customers: 24143
Experience:  Over 17 years diagnosing and repairing automobiles various makes and models with some training and certifications.
Type Your Toyota Question Here...
Pete is online now
A new question is answered every 9 seconds

Replaced 2 modules on Hybride battery,cleared codes. car

Customer Question

Replaced 2 modules on Hybride battery,cleared codes . car worked fine but went into limp mode displaying codes >$7EA $7E8 $7EB.
Submitted: 3 months ago.
Category: Toyota
Expert:  Pete replied 3 months ago.

Hi my name is ***** ***** I will be happy to assist with this today.I apologize for any delay.

These dont look like the factory codes numbers that can set.These look like code numbers that may have been picked up by a generic or incompatible scan tool for your model here.If you can get the fault codes read out with the correct compatible scan tool this will help and post them here.

This may be a calibration issue with a computer on your vehicle after the modules were replaced.

Let me know if you need anything else and feel free to rate my help here as this is how I receive credit for my time.Thanks Pete