How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 773
Experience:  16 years of experience
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

Toyota tacoma 1999 prerunner how do I replace the front hub

Customer Question

Toyota tacoma 1999 prerunner how do I replace the front hub assembly
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: yes
JA: Anything else you think the mechanic should know?
Customer: hub is hard to turn by hand
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Toyota Mechanic about your situation and then connect you two.
Submitted: 3 months ago.
Category: Toyota
Expert:  Ted Ritter replied 3 months ago.


Here is a picture from the manual showing all the components, you can remove the steering knuckle with the hub and bearing, the hub requires a hydraulic press to get it out, it's recommended that you replace the hub and bearing both

Related Toyota Questions