How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Toyota Mechanic
Category: Toyota
Satisfied Customers: 20531
Experience:  Heavy Line Mech-, Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.
1609972
Type Your Toyota Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

I need to replace the door check assembly on the driver's

Customer Question

Hi, I need to replace the door check assembly on the driver's door.
JA: What is the model/year of your Toyota?
Customer: Thanks,
JA: What year is your Toyota?
Customer: Dennis
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Yes, after seing the operation online, I believe I can do it myself.
JA: Anything else you think the mechanic should know?
Customer: No, thanks.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Toyota Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Toyota
Expert:  Don 'Mo Lurch' replied 5 months ago.

Hi, I need to replace the door check assembly on the driver's door.
JA: What is the model/year of your Toyota?
Customer: Thanks,
JA: What year is your Toyota?
Customer: Dennis

sorry.........how would we be able to help you if you do not supply very needed information?
Year?
Model?
2 or 4 door?
Extended cab?

Customer: replied 5 months ago.
It is a 007 Toyota Highlander
Expert:  Don 'Mo Lurch' replied 5 months ago.

.
sorry for the delay............
.
Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”
.
If I remember right, you will need a 10mm wrench, a 10mm 1/4 drive socket & ratchet & a punch tool to remove the PIN
Should be "3" screws securing the Door Check to the Door
Click Attachment below

.
IF you need more information, please ask "prior" to Rating.
.
The way it works:
Once an answer is given, "you" as the customer, are expected to "RATE" the answer as you agreed to do.
.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.

Expert:  Don 'Mo Lurch' replied 5 months ago.

sorry....."2" screws securing the plate

Expert:  Don 'Mo Lurch' replied 5 months ago.

.

did you need more information?
please respond or rate my answer

thank you

Related Toyota Questions