How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 773
Experience:  16 years of experience
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

How do i disable the 1998 toyota 4 runner alarm : what does

Customer Question

how do i disable the 1998 toyota 4 runner alarm
JA: Have you checked the fuses? Is your battery fully charged?
Customer: what does the fuses and battery have to do with the alarm we want to disable it
JA: What is the model of your '98 Toyota?
Customer: limited
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: well... yes we have too we have the dash board apart and the spring loaded red button popped off that goes to the alarm
JA: Anything else you think the mechanic should know?
Customer: we can not put everything back together because the button is broken and the car wont start
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Toyota Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Toyota
Customer: replied 4 months ago.
will the professional be able to answer quickly
Expert:  Chad Farhat replied 4 months ago.

Hi my name is ***** ***** I will be assisting you today

Expert:  Chad Farhat replied 4 months ago.

I will make this short , It can not be done , its is integrated with the pcm ,unfortunately.

sorry wish I had a better answer for you .

Thank You

Chad Farhat ( aka -Customer )
ASE Certified Technician

Expert:  Chad Farhat replied 4 months ago.

this is the diagram, it is in the bcm module and the pcm needs to see that module to authorize starting , you can get rid of this module

Related Toyota Questions