Ok, lock the doors using the inside door lock button and shut all doors. Now unlock the driver door with the key. Leave the driver door open and insert key in the ignition and crank engine.
If this does not work, disconnect the negative cable from the battery. Open driver door and leave open. Insert key in ignition and turn to on position. With key still in on position, wait 1 minute, then reconnect battery cable. Alarm will sound for 60 seconds and then go off and flashing button will stop. cycle key off and then crank engine
Please remember to rate service using the rating page so that I may receive credit. Thanks
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
All follow up responses are FREE, after completing the required rating
Please note that if you have a subscription service, you still are required to rate service, however you are not charged again. This is just so that your expert is credited for their time and services.Thank you.