Toyota Repair Problems? Ask a Mechanic for Answers ASAP
Do you have injector pulse voltage, connecting the voltmeter across both injector wires should show fluctuation in voltage when cranking or if your using an injector test light it should flash, have you verified this?
Thanks for the prompt reply, waiting to hear back from you, take your time.
Yes, I'm still online, please stand by for a moment
All right, then the computer is firing the injectors, does it run if you put some gas directly into the intake?
Sounds like there is no fuel or not enough fuel pressure for the injectors to let fuel through, how is the fuel pressure to the fuel rail?
Was the engine you put in a used one or did someone rebuild it, do you know if it ran before?
Ok, make sure there is at least 38psi while cranking.
Talk to you later.