How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 814
Experience:  16 years of experience
2499435
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

I do not believe I get your info.correctly. What I did was

Customer Question

I do not believe I get your info.correctly. What I did was connect yellow air bag female in wire loom coming into seat with resistor confeguration that you perscribed. 5 10 ohm resistors that gave a resistance of 2.2 ohms. I then took sensors with loom and put them under seat rail. I then take seat belt buckel from manual pass. seat and put in power replacement seat. I think it would be ok to get power from drivers side loom?
Submitted: 9 months ago.
Category: Toyota
Expert:  Pete replied 8 months ago.

Hi my name is ***** ***** I will be happy to assist with this today.In some cases I may need more info to assist better.I apologize for any delay.

Are you or were you working with someone on this here already?

Let me know so we can continue,thanks Pete.