How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 828
Experience:  16 years of experience
2499435
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

Cruise control light flashes when enguaged but doesntwork

Customer Question

cruise control light flashes when enguaged but doesntwork
Submitted: 1 year ago.
Category: Toyota
Customer: replied 1 year ago.
I have replaced the controller & the main mechanical unit on the throttle ?
Expert:  Toyota Service replied 1 year ago.

Hello. Welcome to Just Answer. Please allow me to assist you. Can you please locate the round diagnostic connector under the dash on the driver's side? When you do, let me know so we can proceed with the diagnosis. Thanks

Customer: replied 1 year ago.
I have located it
Expert:  Toyota Service replied 1 year ago.

Sorry about the delay. On the round connector, please locate the 6 cavities on the bottom row, and have a paper clip handy advise when you are ready. Please do not do anything until advised.

Expert:  Toyota Service replied 1 year ago.

On the bottom row (where there are 6 sockets, we want to jump, with a paper clip, numbers 3 and 4 (or the two in the center of the bottom row). Turn the key in and connect the paper clip. Then advise the sequence of the flashes of the cruise light. I e 2 flashes/pause/4 flashes would be a code 24. the sequence will repeat the same if there is only one code.

Related Toyota Questions