How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Certified Technician
Category: Toyota
Satisfied Customers: 12744
Experience:  ASE Master Technician, 32 years, diagnostic/repair / electrical specialist
13677702
Type Your Toyota Question Here...
Randall C is online now
A new question is answered every 9 seconds

REPLACED AC COMPRESSOR AND DRIER OLD ONE WAS LEAKING AROUND

Customer Question

REPLACED AC COMPRESSOR AND DRIER OLD ONE WAS LEAKING AROUND CLUTCH NOW THERE IS NO COLD AIR AC COMP IS RUNNINGS BUT HERES THE NUMBERS LOW IS 95 HIGH IS 0 WEIRD SHOULD BE AROUND 35 LOW WHAT ILL CAUSE THIS PROBLEM
Submitted: 1 year ago.
Category: Toyota
Expert:  Randall C replied 1 year ago.

Hello, did you add oil per specs to each item? did you evac and recharge, meaning was it put under vacuum?

Customer: replied 1 year ago.

YES SIR IT WAS VACCUMED DOWN AND ADDED OIL TO THE COMPRESSOR AS WE ALWAYS DO THIS IS A SHOP WE HAVE REPLACED HUNDREDS OF COMPRESSORS BEFORE THIS ONE IS THE ONLY ONE THIS YEAR THAT GAVE US A PROBLEM

Expert:  Randall C replied 1 year ago.

What are your static pressures?

Customer: replied 1 year ago.

OK ITS AROUND 80 BUT THERS A CODE STORED HARD ONE ITS A B1423 WONT DELETE EITHER COULD THIS BE A AC AMPLIFIER ?????

Expert:  Randall C replied 1 year ago.

I need both static pressures, high and low, this is with car off, , what are the guage readings?