How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Toyota Mechanic
Category: Toyota
Satisfied Customers: 20515
Experience:  Heavy Line Mech-, Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.
1609972
Type Your Toyota Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Iv just a replacement digital clock UK model 2005 model

Customer Question

Iv just a replacement digital clock for my UK model 2005 model Toyota corrola which dose not have clock originally so the one I purchased is from the Canadian model. The clock bit on my dash is a blank panel. So hence I can find a power connection for it from my wiring. But I'm sure it's just a permanent live and a ignition live. But the connector has four pins ? What are the four pins for and which way round do I connect ?
Submitted: 1 year ago.
Category: Toyota
Expert:  Don 'Mo Lurch' replied 1 year ago.
sorry for the delay............
.
Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”
.
Should be a Factory Connector taped up in the harness, but if not:
PIN 1 = BLUE / WHITE + Dome Light
PIN 2 = WHITE / BLACK -
PIN 3 = GREEN -
PIN 4 = GRAY + Constant
.
IF you need more information, please ask "prior" to Rating.
.
The way it works is, "I supply the Answer....You Rate my Answer"
.
Please take a moment to rate my service so that I can get credit for my time.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
Rating is very Important to our Service
.
.
Expert:  Don 'Mo Lurch' replied 1 year ago.

here is schematic

click Attachment below

Customer: replied 1 year ago.
On the 4 pins on the back. Which pin corresponds to earth, live, ignition live and dome.
Customer: replied 1 year ago.
If I'm looking at the back of clock where does pin one start from. That is what I need to know
Expert:  Don 'Mo Lurch' replied 1 year ago.

If I'm looking at the back of clock where does pin one start from. That is what I need to know

.

Please look closely at the back......
PINs should be numbered or there should be a "1" & / or "4"

Expert:  Don 'Mo Lurch' replied 1 year ago.

this is what the Plug in dash should look like & PINs
click Attachment below

Customer: replied 1 year ago.
this a pic of the connector. The pins are aligned on the left hand side so it's pin 1 = 1 bottom = 4 yes
Customer: replied 1 year ago.
top right as you are looking at the pic is pin 1 and the bottom pin is pin 4 ?
Expert:  Don 'Mo Lurch' replied 1 year ago.

correct
see attachment below

Related Toyota Questions