How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Auto Service Technician
Category: Toyota
Satisfied Customers: 24681
Experience:  Over 17 years diagnosing and repairing automobiles various makes and models with some training and certifications.
14928985
Type Your Toyota Question Here...
Pete is online now
A new question is answered every 9 seconds

How do I remove the interior dash parts without breaking to

Customer Question

How do I remove the interior dash parts without breaking to remove a 2011 Toyota Sienna Speedometer cluster?
Submitted: 1 year ago.
Category: Toyota
Expert:  Pete replied 1 year ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
Below is the removal procedure for your instrument cluster with speedometer.
1. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
3. REMOVE LOWER NO. 3 STEERING WHEEL COVER
4. REMOVE LOWER NO. 2 STEERING WHEEL COVER
5. REMOVE STEERING PAD
6. REMOVE STEERING WHEEL ASSEMBLY
7. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
10. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY
11. REMOVE INSTRUMENT SIDE PANEL LH
12. REMOVE INSTRUMENT PANEL FINISH PANEL
13. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
https://www.dropbox.com/s/k2sly2disjkrg29/c-07-07.gif?dl=0
(a)Disengage the 2 claws and 4 clips and separate the instrument cluster finish panel.
(b)Disengage the 11 clips and remove the No. 1 instrument cluster finish panel.
14. REMOVE COMBINATION METER ASSEMBLY
(a)Disengage the 4 screws.
https://www.dropbox.com/s/2mlw8w4fskok5ey/cl-07-07.gif?dl=0
Thanks Pete