How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, ASE Certified Technician
Category: Toyota
Satisfied Customers: 737
Experience:  Senior Technician
84449473
Type Your Toyota Question Here...
Gary is online now
A new question is answered every 9 seconds

2wd Tacoma: David , On a 2rzfe I'm installing a new

Customer Question

Hi David ,
On a 2rzfe I'm installing a new rebuilt head and noticed that the split gear (left looking in) on on the cam has a pin installed, do I need to remove this pin? Thank you
Submitted: 1 year ago.
Category: Toyota
Expert:  Gary replied 1 year ago.
Hi there,
No, you do not remove the pin.
You should have fitted a small bolt into that cam gear to lock the scissor gears together.
They unwound themselves to the "limit pin" when you took the cams out.
You need to wind the gears up to where a second hole lines up and fit a 6mm bolt to hold them locked.
You remove the bolt once the cams are fitted.

Related Toyota Questions