How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BigBob Your Own Question
BigBob
BigBob, Shop manager/Service Manager
Category: Toyota
Satisfied Customers: 4837
Experience:  Shop Manager with 25 years experience
13327319
Type Your Toyota Question Here...
BigBob is online now
A new question is answered every 9 seconds

toyota: 2011 toyota sienna van. how do i reset the oil change

This answer was rated:

2011 toyota sienna van. how do i reset the oil change reminder light?

BigBob :

Greetings and welcome!!!!

1. After changing the engine oil (U.S.A. only)
The engine oil maintenance data should be reset. Perform the following procedures:
Vehicles without a smart key system
Switch the display to the trip meter A and then turn the engine switch off.

2. Vehicles with a smart key system.
Switch the display to the trip meter A and then turn the engine START STOP switch off.

3. Vehicles without a smart key system.
While pressing the trip meter reset button, turn the engine switch to the on position.

4. Vehicles with a smart key system.
While pressing the trip meter reset button, turn the engine START STOP switch to ignition ON mode.
Vehicles without a multi-information display
Continue to press and hold the button until the trip meter A displays 000000
Vehicles with a multi-information display.
Continue to press and hold the button until Complete appears
on the multi-information display.

 

 

Please let me know if i can help further,

Bob

BigBob and 5 other Toyota Specialists are ready to help you