Toyota Repair Problems? Ask a Mechanic for Answers ASAP
Hello.....If you don't have the rubber cap in the front of the cluster where you can insert a paper clip and reset to reset the light , you will need to remove the cluster from the car, place it face down on a cloth to prevent damage to it and remove the screw from the timing belt screw hole and install it in the adjacent screw hole.
When you look at back of the cluster ,the timing belt screw holes are at the top,just left , center of the cluster.
Good luck , let me know if this is what you have . Please rate my answer if i have helped.
Attachments are only available to registered users.