How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Toyota Tech -
Category: Toyota
Satisfied Customers: 17778
Experience:  18+yrs experience. State Inspector and Toyota Diagnostics
Type Your Toyota Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

How does one change the serpentine belt in 2007 Toyota Yar

This answer was rated:

How does one change the serpentine belt in 2007 Toyota Yaris?
Welcome! I'm Ron Z! I will do my best to answer all of your questions. For easy access to this thread, bookmark it now! Please read everything!

To replace the Serpentine Belt on this vehicle, the best access is from under the vehicle.



(a) Loosen bolts A and B.
(b) Release the fan and generator V belt tension and remove the fan and generator V belt.



(a) Provisionally install the fan and generator V belt onto each pulley.

(b) Insert an adjusting bar between the engine mounting bracket and generator assembly. Push the adjusting bar toward the vehicle front to adjust the generator V belt tension.
(c) First tighten bolt A, then tighten bolt B.
Ron Z. and 3 other Toyota Specialists are ready to help you

Related Toyota Questions