I will assist you to get your problem resolved.
Give me a moment to pull up your Toyota.
B1821/55• The center airbag sensor assembly receives an open circuit signal in the side squib (Driver seatside) circuit for 2 seconds• Side squib (Driver seat side) malfunction• Center airbag sensor assembly malfunction• No. 2 floor wire• Front seat with adjuster frame assembly LH (Sidesquib (Driver seat side))• Center airbag sensor assembly
since the light goes on and off randomly what next and is the cost to repair correct?
in other words I was told the entire seat assembly would need replacement since the airbag is not separate
are you still with me
yes meaning the cost to repair is correct?
No. Im still with you checking all possibilities.
When DTC B1821 is output. CHECK NO. 2 FLOOR WIRE (FOR OPEN)
IS THAT THE WIRING HARNESS?
THE IMAGE DOES NOT DISPLAY
It is PDF.
I will resend it.
NO i GOT IT
ARE WE DONE?
If you need more info let me know.
JUST WHETHER OR NOT THE ENTIRE SEAT ASSEMBLY NEEDS REPLACEMENT TO FIX THE AIR BAG IN THE WORSRT CASE SCENARIO
Yes, that is last option.