How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Toyota
Satisfied Customers: 15121
Experience:  30 YRS EXPERIANCE, AUTO AND TRUCK,FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Toyota Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

How do I replace the carrier bearing on my 2011 Tundra?

Resolved Question:

How do I replace the carrier bearing on my 2011 Tundra?
Submitted: 5 years ago.
Category: Toyota
Expert:  Toyotapro replied 5 years ago.
Hello and thank you for using just answer! This requires special service tools and weusually put an assembly in these.....why is this not being addresed under warranty?
Customer: replied 5 years ago.
Truck was in an accident and the bearing needs replaced. Please send me step by step to replace
Customer: replied 5 years ago.
Carrier Bearing on the drive shaft
Expert:  Tim Mohr replied 5 years ago.
Hi, my name is XXXXX XXXXX remove the carrier brg, the shaft has to come out, and the number 2 ujoint is removed, , then the nut that holds the yoke on comes off, and the yoke is removed, then you have to put the shaft in a press, to press off the carrier brg and press it on, i will post a picture showing thios below,Tim
Expert:  Tim Mohr replied 5 years ago.
graphic
Tim Mohr, ASE MASTER TECH
Category: Toyota
Satisfied Customers: 15121
Experience: 30 YRS EXPERIANCE, AUTO AND TRUCK,FOREIGN AND DOMESTIC, GAS AND DEISEL
Tim Mohr and 3 other Toyota Specialists are ready to help you

Related Toyota Questions