How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Toyota
Satisfied Customers: 18592
Experience:  ASE Master Tech 15+ years
Type Your Toyota Question Here...
George H. is online now
A new question is answered every 9 seconds

Toyota Sienna CE P1130 code 2000 toyota sienna

Customer Question

P1130 code? 2000 toyota sienna
Submitted: 6 years ago.
Category: Toyota
Expert:  George H. replied 6 years ago.

Hello I will help you with your question,


The P1130 is a code that means the engine computer has determined that the signal from the upstream oxygen sensors are missing or out of the expected range. Diagnosis with a scantool that will show the sensor data to see which upsteram sensor voltage is out of range when they are warmed up.


Let me know what I can do to help you with this


Thank you



George H. and 5 other Toyota Specialists are ready to help you
Customer: replied 6 years ago.
Do I just replace the O2 sensor?
Expert:  George H. replied 6 years ago.

The sensors can be expensive and hard to change so watching the data from the sensors with a scantool will show which one needs to be changed. There may be a problem with the wiring between the sensor and the computer so replacing the sensor would not solve that but it probably is one of the upstream sensors. There are two.


The sensors can be very hard to get out of the exhaust so an hour's diagnosis at a shop with a scanner and then have them change whichever one shows up dead with an inspection of the wiring would be the best solution


Let me know what I can do to help you with this


Thank you



Related Toyota Questions