How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Genchi Genbutsu Your Own Question
Genchi Genbutsu
Genchi Genbutsu, Toyota Master Technician
Category: Toyota
Satisfied Customers: 4395
Experience:  Toyota Certified Master Diagnostic Technician, ASE Master Technician with L1 Advanced Engine
17930070
Type Your Toyota Question Here...
Genchi Genbutsu is online now
A new question is answered every 9 seconds

How do I replace the engine air filter on a 2008 Highlande

This answer was rated:

How do I replace the engine air filter on a 2008 Highlander?

This is a pretty easy process and you will need and 10mm socket and extension with driver to loosen the 2 bolts. Here is a discussion on the subject with picture...

 

 

http://www.toyotanation.com/forum/showthread.php?t=222176

 

You don't have to remove the MAF Connector but it will make it easier. Just make sure the keys are not in the ignition if you unplug the MAF sensor. Also at the other end of the 2, 10mm bolts you will see the 2 clips and slots they slide into to hold the front side down.

 

Genchi

 

Genchi Genbutsu and 2 other Toyota Specialists are ready to help you