How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kiatech Your Own Question
Kiatech, ASE Certified Technician
Category: Toyota
Satisfied Customers: 400
Experience:  30+ years experience,ASE certified,KIA certified Master Technician,Ford factory trained
Type Your Toyota Question Here...
Kiatech is online now
A new question is answered every 9 seconds

2001 toyota tacoma: A-C heat and cold survo not changing..diagram

This answer was rated:

2001 toyota tacoma truck problem A-C heat and cold survo not changing and also making noise. Need diagram and replacement instructions.

HiCustomer Thank you for using JustAnswer.


The blend door actuator is real simple to replace. You should not have to remove the console. Just one connector and three screws.




  1. Disconnect the servomotor connector.
  2. Remove the 3 screws and servomotor.


Kiatech and 4 other Toyota Specialists are ready to help you