How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 868
Experience:  16 years of experience
2499435
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

el: fusible de 30 amp se funde..de 10 amp

Customer Question

cuando se active el sistema de a/c el fusible de 30 amp se funde. mas no el de 10 amp
Submitted: 7 years ago.
Category: Toyota
Expert:  Jason replied 7 years ago.

Can you please translate to English?, So I can better help you.

Customer: replied 7 years ago.
my english not is good, but I try, when I actived the system A/c . the fuse 30 amp is blown. but the 10 amp not , I changed the compresor A/C, The resistor blower and the relay too.
but the problem continue. i check the both fan is ok . thank
Expert:  Jason replied 7 years ago.

When you turn on a/c, the 30 amp fuse blows?

 

Is it a manual (lever) or automatic (push button) a.c system?

Customer: replied 7 years ago.
yes,
Expert:  Jason replied 7 years ago.

Is it a manual (lever) or automatic (push button) a.c system?

 

What fuse is it? I dont show any 30 amp fuses in a/c system

Customer: replied 7 years ago.
It is manual ,
the fuse what control both fan motor and the fan a/c ,
ok when the machine in turn on, the fan motor work normal on anf off , but if I turn on a/c
the fuse of 30 amp is blown, thi fuse is the box fuse at right with name RDI 30 amp
Expert:  Jason replied 7 years ago.
You have a dead short in the wiring, Both fans share a ground, since the Rdi is the only fuse blowing, you have to backprobe the wiring from the RDi fuse
Customer: replied 7 years ago.
I did it ,but not found nothing
Expert:  Jason replied 7 years ago.
So the rad fan works fine until the a/c fan turns on, then the fuse blows, and all fans stop working. This sound right?
Customer: replied 7 years ago.
exactly
Expert:  Jason replied 7 years ago.
Does the 30 amp CDS fuse blow????
Customer: replied 7 years ago.
it dont have one on there, but I put one fuse there and the fan A/C work constantly.
Expert:  Jason replied 7 years ago.

swap the NO2 and no3 fan relay and tell me if it makes a difference

Customer: replied 7 years ago.
not,
maybe the A/C control module have the problem what you think?
Expert:  Jason replied 7 years ago.
swap the NO2 and no3 fan relay and tell me if it makes a difference
Customer: replied 7 years ago.
I did it , not makes diffrence
Expert:  Jason replied 7 years ago.
Put the cds fuse in and remove the NO 2 relay, tell me what happens
Customer: replied 7 years ago.
ok i have to go in this moment, but I'll be back in 30 minutes ok. thank jason
Expert:  Jason replied 7 years ago.
ok
Customer: replied 7 years ago.
I did it. everything, but the problem continue, en Idle after two minutes the motor shake,
and down.
Expert:  Jason replied 7 years ago.

I dont understand.