Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
P0500 fault code on dyno only, not ever under driving conditions on 2003 3.0 V6 Camry. How do I correct this problem?
Hello and thank you for using just answer.
A P0500 is a typical/normal code to set if you have the car on a dyno, this code is a speed sensor code, the car recognizes a fault or failure because it sees wheel speed on 2 wheels but not on the other 2. On older cars before ABS braking was put into production the speed sensor was built into the transmission, on your car you have a wheel speed sensor on each of the 4 wheels. This code should clear itself out after being driven 2 cycles.