How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Fixitman Your Own Question
Fixitman, Master Technician
Category: Toyota
Satisfied Customers: 17085
Experience:  ASE Master Certified, AA Degree Auto/Diesel Tech
Type Your Toyota Question Here...
Fixitman is online now
A new question is answered every 9 seconds

22R engine torque spec.

Customer Question

22R engine torque spec.s flywheel, head gasket, lifters clearance intake and exhaust, & timing chain gear mark alingment, thanks 1990 1/4 ton Toyota manual trany
Submitted: 8 years ago.
Category: Toyota
Expert:  Fixitman replied 8 years ago.
HelloCustomer the specs are as follows. Let me know if you need more help.

Install the flywheel on the crankshaft with the 6 bolts. Torque the bolts.
80 ft.lbs. (108 N.m , 1,100 kgf-cm).


2 Install and tighten the head bolts gradually in 3 passes in the sequence shown.
3 Torque the bolts on the final pass.
Torque:58 ft.lbs. (800, 78 Nm)

Valve clearance (Hot):
Intake:0.008 in. (20mm)
Exhaust:0.012 in. (30mm)

The pictures shown where the bright links of the timing chain go.


Fixitman and other Toyota Specialists are ready to help you
Customer: replied 8 years ago.
thanks much Gordy
Expert:  Fixitman replied 8 years ago.
No problem. Let me know if you need anything else.

Related Toyota Questions