How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Auto Technician
Category: Toyota
Satisfied Customers: 773
Experience:  16 years of experience
Type Your Toyota Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

2005 prius: After replacing abs control unit..factory

Customer Question

After replacing abs control unit on 2005 prius, can the calibration be reset without factory computer?
Submitted: 8 years ago.
Category: Toyota
Expert:  Ted Ritter replied 8 years ago.
Probably not, what codes are you still getting now.
Customer: replied 8 years ago.
Reply to ted ritter's Post: code c1246 (master cyl press sensor)
c1364 (w/c press sensor)
c1365 (acc press sensor) I have a snap on solis scanner, says to recalibrate master cylinder press sensor after replacement. It says to jump the ts & cg terminals of dlc and press diff lock (vsc) switch 3 times in 3 sec. (prob due to vehicle does not have a switch I dont think) any suggestions?? thanks nick

Related Toyota Questions