How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Toyota Mechanic
Category: Toyota
Satisfied Customers: 20429
Experience:  Heavy Line Mech-, Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.
Type Your Toyota Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

No Comment Added

Resolved Question:

No Comment Added
Submitted: 9 years ago.
Category: Toyota
Expert:  Don 'Mo Lurch' replied 9 years ago.

NOTE: Some Toyota models have an access plate in the fender well to facilitate starter service. Check for such an access point before beginning starter service.

  1. Disconnect cable from the negative terminal of the battery.
  2. Remove the nut and disconnect the battery cable from the magnetic switch on the starter motor.
  3. Disconnect the other wire from terminal 50.
  4. Remove the nut and bolt, and remove the starter motor from the flywheel bellhousing.
Don 'Mo Lurch' and other Toyota Specialists are ready to help you

Related Toyota Questions