Join the 9 million people who found a smarter way to get Expert help

Recent Small Freezer Problems questions

Our Sub Z fridge says service and fridge is set to 34 but

Our Sub Z fridge says service and fridge is set to 34 but showing 56 degrees. The freezer seems fine as it is set at -2 and showing current temp at -2.

Read more

Randy 43

appliance technician

Vocational, Technical or Trade Scho

2,712 satisfied customers
WF306LAW/XAA drain pump has been replaced and only works for

WF306LAW/XAA drain pump has been replaced and only works for a few seconds. when i do the spin/soil/power button push i get F011 code first then F3 neither of which i can find on any website including samsung, they dont even recongnize the model number

Read more

Appliance Guru

Service Technician

Associate Degree

25,502 satisfied customers
My down button on my window unit AC won't lower the

My down button on my window unit AC won't lower the temperature. It will only switch between Fahrenheit and Celsius.

Read more

Appliance Guru

Service Technician

Associate Degree

25,502 satisfied customers
Model: mfx2570aem4 - water has been leaking on floor

model: mfx2570aem4 - water has been leaking on floor intermittently. defrost system is clear (no ice, duckbill is clean) and drip pan has nothing in it. ran out water chiller tank and a little while after that we had another puddle on the floor.

Read more

Appliance Guru

Service Technician

Associate Degree

25,502 satisfied customers
I have tried for hours to reach sentry safe over the last

I have tried for hours to reach sentry safe over the last few days. I am 68, had major water damage in my home. I put my needed medication in the safe. I have changed batteries etc.Cannot get it to open. the only number I can find is AU or it is AJ 965550. Sentry safe has terrible phone service and customer service. Thanks, ***** ********@******.***. Cell(###) ###-####

Read more

Kelly

Owner/Technician

High School or GED

30,880 satisfied customers
HOW DO YOU RESET THE REFRIGERATOR SETTING ON A MAYTAG model

HOW DO YOU RESET THE REFRIGERATOR SETTING ON A MAYTAG model # MFI2568AEW REPLACE CNTRL-ELEC BOARD IN BACK AND NOW ALL LIGHTS ON DOOR ARE FLASHING

Read more

Tyler Z.

Appliance Technician

Bachelor's Degree

69,154 satisfied customers
My frigidaire refrigerator serial # A24521501 is

My frigidaire refrigerator serial # A24521501 is accumulating water on the bottom where the door closes. It has a bottom freezer and both refrigerator part and freezer seem to be working properly. It is 4 years old. Any advice on what could be wrong?

Read more

Kelly

Owner/Technician

High School or GED

30,880 satisfied customers
I have a kitchenaid dishwasher and ordered a replacement

I have a kitchenaid dishwasher and ordered a replacement part but its unclear how to get out the old part and put in the new one.Dishwasher is model KUDK03ITWH3Part is Wheel Tub part number PS11748145.does the entire dishwasher need to be pulled out to access screws on the outside of the tub that hold in the old wheel tub part I am replacing? thanks.

Read more

Tyler Z.

Appliance Technician

Bachelor's Degree

69,154 satisfied customers
I have some questions about my samsung fridge and am

Hello, I have some questions about my samsung fridge and am wondering if I could ask a technician a few questions. Thank you.JA: Can you guesstimate how old your Samsung is? And just to clarify, what's the exact model?Customer: Yes, .We are having issues with our Samsung fridge model RF266aepn. It is seven years old now and has worked fine until last year when the temperature rose because it had frozen over in the back panel. We defrosted it and did not have any issues until 3 weeks ago when it again froze up. We fully defrosted it and it gave us error code 4. We had a tech. come out and he replaced the temperature sensor which was not effective, he replaced the fan, which again is not effective. It is now cooling in both the fridge and freezer but not to the correct temps of 38 and -2 respectively and the display board is showing a completely incorrect temps altogether. I have run the diagnostic program several times and it is giving us full 88-88 with no error codes at all but it chimes every 11 times every 2 mins. We have been advised to replace the main control panel DA41-00651 J which my husband would be able to do DIY. My problem is that I am unsure if the control panel is in fact the part we need to replace or if we need a new thermosensor, or door closing sensor and concerned that this third repair will not fix the all of the issues and further repairs may be required.JA: Do you plan on doing the work yourself?Customer: Yes. My husband is able to do all of the repair we only called in a technician as we were out of town.JA: Anything else we should know to help you best?Customer: I think we are wanting help to make sure we are getting the correct diagnosis, some idea of the chances of the repair being effective vs. this fridge being done, and help if my husband runs into questions.

Read more

Appliance Guru

Service Technician

Associate Degree

25,502 satisfied customers
View more appliance questions
In The News