THERE IS NOT A FUSE FOR IT ,
IT IS CONTROLLED BY A MODULE, BUT YOU CAN UNPLUG THE CONNECTOR IN THE DIAGRAM I SENT YOU
2010 Subaru Legacy F4-2.5L SOHC
Trunk Lid Latch and Actuator Assembly INSPECTION 1. TRUNK LID LATCH Check if the trunk lid latch operates normally. If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the rear gate latch & actuator assembly. 2. LOCK ACTUATOR 1. Disconnect the trunk lid latch & actuator assembly connector. 2. Check the door lock operation by applying battery voltage between the terminals of trunk lid latch & actuator.
Let me know if you need anything else on it, Just reply back here and can continue
if you are good , Please Kindly rate me.
Hope I was helpful to you
A Positive Rating is Much Appreciated
This Post Will Stay Open for You To Come back and Ask me Any Follow Up Question You May have on this issue , even after you rate me
ASE Certified Technician