How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike V. Your Own Question
Mike V.
Mike V., Subaru Technician
Category: Subaru
Satisfied Customers: 23617
Experience:  Certified Subaru Technician, factory trained by Subaru.
Type Your Subaru Question Here...
Mike V. is online now
A new question is answered every 9 seconds

I have a 2009 subaru outback with a CO 106 107 and 108 code,

Customer Question

i have a 2009 subaru outback with a CO 106 107 and 108 code
JA: Thanks. Can you give me any more details about your issue?
Customer: It's not letting the trans downshift properly
JA: OK got it. Last thing — Subaru Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 7 months ago.
Category: Subaru
Expert:  Mike V. replied 7 months ago.

Hi there,

Have you done anything to resolve the codes yet?
Was this in an accident or anything?

Customer: replied 7 months ago.
it is a 06 legacy outback...slips in third gear sometimes but only upshifting from second, has codes co106 co107 co108 wanted to know the definition
Expert:  Mike V. replied 7 months ago.

C0106 is a code for the LH rear wheel speed sensor.

C0107 is a code for the RF wheel speed sensor and

C0108 is a code for the LF wheel speed sensor.

These could affect the shifting if the car thinks it's in a slide or the wheels are spinning. The abs and traction control lights should be on.

Expert:  Mike V. replied 7 months ago.

Hello, just checking back to see if you needed further assistance?