How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tamaz Your Own Question
tamaz
tamaz, Subaru master technician
Category: Subaru
Satisfied Customers: 1168
Experience:  Subaru certified,ASE Master technician,25 years experience
70031029
Type Your Subaru Question Here...
tamaz is online now
A new question is answered every 9 seconds

How do you get the panels off to get to a strut bolt in the

Customer Question

how do you get the panels off to get to a strut bolt in the right rear of an 2009 subaru outback
Submitted: 1 year ago.
Category: Subaru
Expert:  tamaz replied 1 year ago.

Hi,the only panels that you need to remove are the floor panels in the cargo area the two bolts needed to be removed can be done with a opened end wrench 14mm.