Subaru Problems? Ask a Mechanic for Answers ASAP
cruise control always gets disabled when the engine light comes on ...The check engine light comes on when the on-board computer detects a fault in engine driveability or performance, transmission control system or transmission, or the emissions system, and a fault code is set and stored in the computer. Faults that can set the check engine light can range from a vaccuum leak, engine mis-fire, low engine compression, faulty sensor such as O2 sensor or other engine sensor, hydraulic pressure loss in transmission, transmission shift solenoid, open/short in wiring harness, emission evaporative system leak, or one of over a hundred different reasons.The only way to know what set a fault code and turned the check engine light on is to have a diagnostic scanner hooked up to the on-board computer and read it for stored diagnostic fault codes. Many auto parts stores will do this service for free- (like auto zone)check with you local parts stores. If none in your area do, then you will have to take it to a shop and pay to have the computer read for stored fault codes.Without knowing the fault codes numbers, it would be irresponsible to guess as to the cause as there are hundreds of possible causes
If you have any more questions on this, please feel free to ask.
If not, and you're satisfied with my help, please Rate me. That is how I get credit for my work. I hope I have provided you with Excellent Service