How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Amedee Your Own Question
Amedee
Amedee, Subaru Technician
Category: Subaru
Satisfied Customers: 24432
Experience:  ASE Technician advanced level specialist. Wisconsin certified emissions state inspector
279429
Type Your Subaru Question Here...
Amedee is online now
A new question is answered every 9 seconds

I recently acquired a '94 Loyale with a no spark condition.

Customer Question

Hi! I recently acquired a '94 Loyale with a no spark condition. Coil and distributor checked/replaced, relays, fuses and fusible links checked. I am suspicious of a few other problems with the vehicle.....no horn, no hazard lights (turn signals work), no check engine light with ignition on, and no red light on the ECU. The #5 fuse seems fine.
Thanks!
Submitted: 1 year ago.
Category: Subaru
Expert:  Amedee replied 1 year ago.

Hello and welcome! Cam I start by getting your VIN and the code or codes in the computer?

Customer: replied 1 year ago.
Thank you. VIN is JF2AN52B9RD422731. I'm unable to retrieve any codes.....light on ECU does not come on normally or during self diagnostic.
Customer: replied 1 year ago.
Hazard lights work now, so my main concern is the fact that I don't have a check engine light with the ignition on, and no light on the ECU.
Customer: replied 1 year ago.
Problem solved! Broken wire to ignition relay diode under dash.
Now my problem is it wont stay running and it backfires (out the intake)