How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin C. Your Own Question
Kevin C.
Kevin C., Subaru Master Tech.
Category: Subaru
Satisfied Customers: 1727
Experience:  34 years of Subaru service experience, ASE Master Technician.
49406277
Type Your Subaru Question Here...
Kevin C. is online now
A new question is answered every 9 seconds

Subaru legacy gt: I have a 98 subaru legacy that is giving

Customer Question

I have a 98 subaru legacy that is giving the p0183 code, I dont have 600 bucks to have the dealership change the pump and sending unit, so I went to an import parts place and bought a new pump and used the old sending unit. now it is throwing this code and wont pass DEQ . took the unit out again and inspected the wire to the fuel temp sensor and the lead wire looked corroded at the conection to the sensor so I removed the corroded part stripped the wire back and re-soldered ...still giving that code! car runs fine just cant get that light to stop ...any ideas?
Submitted: 1 year ago.
Category: Subaru
Expert:  Mike V. replied 1 year ago.
Hi there,Do you have a volt meter?