How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dr.carz Your Own Question
Dr.carz, ASE Certified Technician
Category: Subaru
Satisfied Customers: 303
Experience:  12 years exp. 3years with independant with good subaru client, driveability specialist
Type Your Subaru Question Here...
Dr.carz is online now
A new question is answered every 9 seconds

2010 subaru legacy: take out the whole headlight assembley..light bulb

Customer Question

how to take out the whole headlight assembley of a 2010 subaru legacy to change h7 light bulb
Submitted: 6 years ago.
Category: Subaru
Expert:  Dr.carz replied 6 years ago.
if you need to take out the whole assembly the front bumper cover will have to be removed,you should be able to change the bulb without doing so unless you are upgrading.remove rubber cover at rear of headlamp and release wire clip and remove bulb.note that the clip is just spring pressure and hooked in on one side push in and slide up or down to release