How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask StructuralEng Your Own Question

StructuralEng
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 6749
Experience:  Structural Engineer
59685895
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

Im going to span 10' of what used to be as wall, there is no

Customer Question

im going to span 10' of what used to be as wall, there is no 2nd floor or attic to walk in. I thought id use 2- 2x10"x11' sandwiched with 1/2' plywood glued and screwed together, your thoughts
JA: OK. Is there anything else the Structural Engineer should be aware of?
Customer: no not that im aware of
Submitted: 11 days ago.
Category: Structural Engineering
Expert:  StructuralEng replied 11 days ago.
Hello
Customer: replied 11 days ago.
do you have an answer for me?
Expert:  StructuralEng replied 11 days ago.
I can help.
Expert:  StructuralEng replied 11 days ago.
What is it supporting if not a floor or attic? The roof?
Customer: replied 11 days ago.
don't really need a live call, what can you tell me about the beam i'm proposing to build and insert
Expert:  StructuralEng replied 11 days ago.
Can you tell me what it's supporting?
Customer: replied 11 days ago.
the roof
Expert:  StructuralEng replied 11 days ago.
What is the rafter length on each side of the beam? What is the city and state so I can look at snow loading?

Related Structural Engineering Questions