How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask StructuralEng Your Own Question

StructuralEng
StructuralEng, Consultant
Category: Structural Engineering
Satisfied Customers: 6689
Experience:  Structural Engineer
59685895
Type Your Structural Engineering Question Here...
StructuralEng is online now
A new question is answered every 9 seconds

I need to span a 22" section for a ridge beam and would

Customer Question

I need to span a 22" section for a ridge beam and would lioke to know what dimension of manufactured beam would be required
JA: OK. Tell me a bit more about what's going on so we can help you best.
Customer: Hello Pearl, that was my grandmothers name.
JA: Is there anything else the Structural Engineer should be aware of?
Customer: There will be 2x6 rafters on 16" centens on a 12 ' span along the length
Submitted: 3 months ago.
Category: Structural Engineering
Expert:  StructuralEng replied 3 months ago.
Hello
Expert:  StructuralEng replied 3 months ago.
I can help
Expert:  StructuralEng replied 3 months ago.
The rafters are 12' on each side?
Is this a vaulted ceiling?
What is the city and state so I can look at snow loading?

Related Structural Engineering Questions